Coil Over w/reservoir 2.5

(We also carry 2.0 inch Coil Over w/reservoir Shocks. More Info)

This shock was the inspiration for our entire company. To build a quality coilover shock that could be priced for the masses. Once you hold one of these in your hand, you'll know we succeeded.
We start with a 2.5 DOM body and machine in a large ACME thread to ease preload adjustment. Our shock ends are made with a High Pressure cast system specifically designed with strength in mind. Cast in spherical bearings ensure a solid mount. A fully rebuildable and revalvable piston/shim arrangement gives endless possibilities. Our seal head is set up with Buna-N seals, good for temps of 250 degrees. We offer a Viton seal upgrade that can handle temps up to 400 degrees for you hard chargers. Our plated hardened chrome 7/8 shaft ensures you that your shock is made for the long haul. Our upper spring preload adjuster can be easily adjusted using a simple strap wrench and an allen wrench to tighten it down with. Our large remote reservoir uses a floating piston to keep the oil and air separated. This ensures more consistent performance and aids in cooling as well.

Our smaller shocks (6-8") can be set up with a single coil spring, or you can opt for a dual rate setup as well. The larger shocks will all require the dual rate hardware...a $25 option that gets you the spring floater (divider) and a crossover adjustment nut for tuning options.

Shock lengths eye to eye-	collapsed		extended
6in.   -------------------------------	14.25"	---------	20.25"
8in.   -------------------------------	16.25"	---------	24.25"
10in. -------------------------------	18.25"	---------	28.25"
12in. -------------------------------	20.25"	---------	32.25"
14in. -------------------------------	22.25"	---------	36.25"
16in. -------------------------------	24.25"	---------	40.25"
18in. -------------------------------	26.25"	---------	44.25"

Orders are typically shipped within 14 working days from reciept of order. All products are custom built to order, and as such delays are possible depending upon current order levels. Please allow approx. 1 week shipping transit time for the east coast.

All FOA products carry a 6 month Warranty against defects in materials and workmanship.

All shocks/bumpstops ship without nitrogen charge and will need to be charged before usage.

-Recommended charge-
Emulsions- 100-150psi
reservoir- 130-180psi
bumpstops- 80-250psi